If you own a Maytag Neptune washer, you may have experienced issues with its control board. The control board is a crucial part of the washer, and when it malfunctions, it can cause several problems.
In this article, we will discuss the common problems that occur with Maytag Neptune washer control boards and their solutions.
Table of Contents
- What is a Maytag Neptune Washer Control Board?
- Common Problems with Maytag Neptune Washer Control Boards
- Washer Not Turning On
- Control Board Lights Not Working
- Error Codes Displayed on Control Board
- Washer Not Starting
- Washer Stops Mid-Cycle
- Control Board Buttons Not Responding
- How to Troubleshoot Maytag Neptune Washer Control Board Problems
- Reset the Control Board
- Check the Power Supply
- Check for Loose Connections
- Check the Control Board for Burnt Out Components
- Replace the Control Board
Maytag is a popular brand of washing machines known for its high-quality and durability. However, even the most reliable appliances can develop problems over time, and Maytag Neptune washers are no exception.
One of the most common issues with Maytag Neptune washers is with their control boards.
What is a Maytag Neptune Washer Control Board?
The control board of a Maytag Neptune washer is a circuit board that controls the various functions of the washer.
It is responsible for sending signals to the washer’s various components to carry out specific tasks, such as filling the tub with water, agitating the clothes, draining the water, and spinning the drum.
Common Problems with Maytag Neptune Washer Control Boards
Here are some of the common problems that occur with Maytag Neptune washer control boards:
1. Washer Not Turning On
If your washer is not turning on, the problem could be with the control board. The control board may have failed or become faulty, preventing the washer from receiving power.
2. Control Board Lights Not Working
If the lights on your washer’s control board are not working, this could indicate a problem with the control board’s power supply or circuitry.
3. Error Codes Displayed on Control Board
If your Maytag Neptune washer’s control board displays an error code, this can indicate a problem with a specific component or system. Error codes can help you diagnose the problem and determine the best course of action to fix it.
4. Washer Not Starting
If your washer does not start when you press the start button, the problem could be with the control board. The control board may not be sending the signal to the washer’s components to start the wash cycle.
5. Washer Stops Mid-Cycle
If your Maytag Neptune washer stops mid-cycle, the problem could be with the control board. The control board may be sending conflicting signals to the washer’s components, causing them to stop working.
6. Control Board Buttons Not Responding
If the buttons on your Maytag Neptune washer’s control board are not responding, the problem could be with the control board. The control board may have failed or become faulty, preventing it from receiving and responding to button presses.
How to Troubleshoot Maytag Neptune Washer Control Board Problems
If you’re experiencing problems with your Maytag Neptune washer’s control board, here are some troubleshooting steps you can take:
1. Reset the Control Board
One of the first things you can do is to reset the control board. You can do this by unplugging the washer for a few minutes and then plugging it back in. This will reset the control board.
2. Check the Power Supply
If your washer is not turning on, check the power supply. Make sure that the washer is properly plugged in and that the outlet is receiving power. You can also try plugging another device into the same outlet to see if it works.
3. Check for Loose Connections
If the control board lights are not working or the buttons are not responding, check for loose connections. Make sure that all of the wiring connections on the control board are secure and not loose. You can also check the wiring connections on the other components of the washer, such as the motor and pump.
4. Check the Control Board for Burnt Out Components
If your control board has burnt out components, you will need to replace the board. To check for burnt out components, look for any discolored or blackened areas on the board. This can indicate that a component has failed and needs to be replaced.
5. Replace the Control Board
If none of the above troubleshooting steps work, you may need to replace the control board. You can purchase a new control board from Maytag or from a third-party supplier. Make sure to follow the manufacturer’s instructions for replacing the board.
The control board is an essential component of your Maytag Neptune washer, and if it malfunctions, it can cause several problems. By understanding the common problems with Maytag Neptune washer control boards and how to troubleshoot them, you can save yourself time and money on costly repairs.
LEARN MORE >> Maytag Washer Repair Help at Repair Clinic
- What causes control board failure in Maytag Neptune washers?
- Control board failure in Maytag Neptune washers can be caused by various factors, such as power surges, age, and normal wear and tear.
- How much does it cost to replace a Maytag Neptune washer control board?
- The cost of replacing a Maytag Neptune washer control board can vary depending on the model and supplier. On average, it can cost between $100 and $300.
- Can I replace the control board on my Maytag Neptune washer myself?
- Yes, you can replace the control board on your Maytag Neptune washer yourself if you have the necessary tools and knowledge. However, if you are not comfortable with DIY repairs, it is recommended to seek professional help.
- Can a faulty control board damage other components of my Maytag Neptune washer?
- Yes, a faulty control board can cause damage to other components of your Maytag Neptune washer if not addressed promptly. It is essential to troubleshoot and fix control board problems as soon as possible to avoid further damage.
- How long do Maytag Neptune washer control boards last?
- Maytag Neptune washer control boards can last for several years with proper maintenance and care. However, they can fail prematurely due to various factors such as power surges, age, and wear and tear.
Other Control Board Repair Services:
- Troubleshooting Maytag Neptune Washer Control Board Issues
- Frigidaire Oven Buttons Not Working? Troubleshoot Your Control Board
- Frigidaire Oven Not Heating? How to Fix with Control Board Troubleshooting