Whirlpool Dryer Control Board Replacement

Whirlpool Dryer Control Board Replacement Guide

Are you experiencing issues with your Whirlpool dryer’s functionality? If so, it might be time for a control board replacement. The control board is a vital component that regulates various functions of the dryer, and replacing it can help restore optimal performance and resolve common problems.

In this article, we will guide you through the process of replacing the Whirlpool dryer control board, ensuring your appliance operates smoothly once again.

The Whirlpool Clothes Dryer

Whirlpool clothes dryers are well-known for their reliability and performance in the laundry room. With their sleek designs and advanced features, Whirlpool dryers offer efficient and effective drying solutions for households.

These dryers are equipped with innovative technologies such as moisture sensors, multiple drying cycles, and temperature controls to ensure clothes are dried to perfection while minimizing energy consumption.

Whirlpool dryers are built to handle various load sizes and fabric types, providing flexibility and convenience. Whether it’s a compact model for smaller spaces or a large-capacity dryer for handling bulky items, Whirlpool dryers offer a range of options to suit different needs.

With their durable construction and user-friendly interfaces, Whirlpool dryers are a popular choice among homeowners seeking high-quality and dependable laundry appliances.

Understanding the Whirlpool Dryer Control Board

The control board, also known as the main control or electronic control board, is responsible for regulating the dryer’s operations.

It receives input from various sensors and user-selected settings, then sends signals to other components to execute the desired functions.

The control board plays a crucial role in maintaining the correct temperature, managing the drying cycles, and monitoring safety features.

Types of Whirlpool Dryer Control Board

Whirlpool dryers come with different types of control boards that are specifically designed for various models and functionalities. Here are some common types of Whirlpool dryer control boards:

  1. Electronic Control Board: This is the standard type of control board found in most Whirlpool dryers. It is responsible for controlling the various functions and settings of the dryer, such as temperature, cycle duration, and sensor readings.
  2. Touchpad Control Board: Some Whirlpool dryers feature a touchpad control board, which allows users to select and adjust settings using a touch-sensitive interface. These control boards often have additional features such as digital displays and programmable options.
  3. Digital Display Control Board: Whirlpool dryers with digital displays have control boards that incorporate a digital screen for enhanced visibility and user interaction. The digital display provides real-time information about the selected settings, time remaining, and any error codes that may occur.
  4. Programmable Control Board: Certain Whirlpool dryer models offer programmable control boards, allowing users to customize drying cycles according to their specific needs. These control boards provide the flexibility to set precise drying times, temperatures, and other parameters.
  5. Advanced Sensor Control Board: Whirlpool dryers equipped with advanced sensor technology feature control boards that integrate moisture sensors. These sensors detect the level of moisture in the clothes and adjust the drying time accordingly, ensuring optimal drying results and energy efficiency.
  6. Smart Control Board: With the advent of smart home technology, some Whirlpool dryers now come with smart control boards. These control boards can be connected to home Wi-Fi networks, allowing users to control and monitor their dryers remotely through mobile apps or voice assistants.

It’s important to note that the availability of these control board types may vary depending on the specific Whirlpool dryer model.

When replacing a control board, it is crucial to ensure compatibility with your dryer model and consult the manufacturer’s guidelines or seek professional assistance if needed.

Populare Models of Whirlpool Dryer Control Board

Whirlpool offers a range of popular models of dryer control boards that cater to different dryer types and functionalities. These control boards are designed to ensure smooth and efficient operation of Whirlpool dryers, providing users with convenient and reliable drying solutions.

  • W11158453 Whirlpool Dryer Control Board
  • W11189137 Whirlpool Dryer Control Board
  • W11351728 Whirlpool Dryer Circuit Board
  • W11370450 Whirlpool Dryer Control Panel
  • W11378949 Whirlpool Dryer Electronic Control Board
  • W11481725 Whirlpool Dryer Control Board
  • W11537215 Whirlpool Dryer Main Control Board
  • W11537223 Whirlpool Dryer Control Board
  • WPW10110641 Whirlpool Dryer Electronic Control Board
  • WPW10111606 Whirlpool Dryer Main Control Board
  • WPW10111616 Whirlpool Dryer Main Control Board
  • WPW10111617 Whirlpool Dryer Control Board
  • WPW10141671 Whirlpool Dryer Main Control Board
  • WPW10169969 Whirlpool Dryer Main Control Board
  • WPW10174745 Whirlpool Dryer Electronic Control Board
  • WPW10174746 Whirlpool Dryer Main Control Board
  • WPW10235613 Whirlpool Dryer Main Circuit Board
  • WPW10256719 Whirlpool Dryer Main Control Board
  • WPW10378252 Whirlpool Dryer Circuit Board
  • WPW10542001 Whirlpool Dryer Main Control Board
  • WPW10739349 Whirlpool Dryer Control Board

and more.

Signs of a Faulty Control Board

Identifying the signs of a faulty control board is essential to determine if it requires replacement. Some common symptoms of a malfunctioning control board in a Whirlpool dryer include:

  1. The dryer fails to start or respond when the power button is pressed.
  2. The control panel displays error codes or behaves erratically.
  3. The dryer stops mid-cycle or doesn’t complete a full drying cycle.
  4. The dryer overheats or fails to generate enough heat.
  5. The control buttons become unresponsive or work intermittently.

If you observe any of these issues, it’s likely that your control board needs replacement.

Steps to Replace the Whirlpool Dryer Control Board

Before starting the replacement process, gather the necessary tools and materials. You will need a screwdriver, pliers, a multimeter, and the replacement control board specifically designed for your Whirlpool dryer model.

Once you have everything ready, follow these steps:

  1. Disconnect the power supply: For safety purposes, unplug the dryer from the electrical outlet or turn off the circuit breaker connected to it.
  2. Access the control board: Depending on your dryer model, you may need to remove the dryer’s top panel or front panel to access the control board. Refer to your dryer’s user manual for specific instructions.
  3. Remove the old control board: Locate the control board, usually found near the top of the dryer, and disconnect the wiring harnesses and connectors attached to it. Take note of their positions for easy reinstallation later. Carefully remove any screws or fasteners securing the control board in place.
  4. Install the new control board: Position the replacement control board in the designated area and secure it with screws or fasteners. Reconnect the wiring harnesses and connectors, ensuring they are properly seated.
  5. Reassemble the dryer: Follow the reverse steps of removing the dryer’s panels to put everything back together. Make sure all panels are securely in place.

Testing the New Control Board

After replacing the Whirlpool dryer control board, it’s crucial to test the functionality of the new component. Follow these steps to ensure the replacement was successful:

  1. Reconnect the power supply: Plug the dryer back into the electrical outlet or turn on the circuit breaker.
  2. Power on the dryer: Press the power button and check if the dryer starts up without any issues. The control panel should display the normal startup sequence.
  3. Select a drying cycle: Choose a drying cycle and adjust the settings as desired. Pay attention to any error codes or unusual behavior displayed on the control panel.
  4. Monitor the drying process: Allow the dryer to run through a complete cycle and observe its performance. Ensure that it reaches the appropriate temperature and maintains consistent heat throughout the cycle.
  5. Test additional features: If your Whirlpool dryer has advanced features such as moisture sensors or different drying options, test them to verify their proper functioning.

If the dryer operates smoothly without any irregularities, it indicates a successful replacement of the control board.

However, if you encounter persistent issues or the dryer continues to malfunction, it might be necessary to consult a professional technician for further assistance.

Troubleshooting Common Issues

In some cases, even after replacing the control board, you may still encounter issues with your Whirlpool dryer. Here are a few common problems and troubleshooting steps:

  1. Error codes: If the control panel displays error codes, refer to your dryer’s user manual or the manufacturer’s website to understand the meaning of the code. Follow the recommended troubleshooting steps or contact customer support for assistance.
  2. Inconsistent heat: If the dryer fails to generate enough heat or overheats, ensure that the ventilation system is clean and unrestricted. Clogged vents or a malfunctioning heating element can impact the dryer’s performance. Clean the vents and replace the heating element if necessary.
  3. Unresponsive controls: If the control buttons remain unresponsive or work intermittently, check the wiring connections between the control board and the control panel. Loose or damaged connections can cause control issues. Reconnect or replace the wiring as needed.

If these troubleshooting steps do not resolve the problems, it is advisable to seek professional repair services to diagnose and fix the underlying issues.

Maintenance Tips for the Whirlpool Dryer Control Board

To extend the lifespan of your Whirlpool dryer control board and minimize the chances of future malfunctions, consider the following maintenance tips:

  1. Regular cleaning: Keep the dryer and its surrounding area clean from lint, dust, and debris. Clean the lint filter after every use and periodically vacuum the dryer’s interior and exhaust vents.
  2. Proper ventilation: Ensure that the dryer is properly vented to allow efficient airflow. Blocked or restricted vents can lead to overheating and strain the control board.
  3. Avoid overloading: Do not overload the dryer with excessive laundry. Overloading can cause strain on the control board and other components, leading to premature wear and tear.
  4. Gentle handling: Handle the control panel and buttons with care. Avoid pressing or forcing the buttons excessively, as this can cause damage to the control board.

By following these maintenance practices, you can promote the longevity and optimal performance of your Whirlpool dryer control board.

Benefits of Replacing a Faulty Control Board

Replacing a faulty control board in your Whirlpool dryer offers several benefits, including:

  1. Improved functionality: A new control board ensures that your dryer operates smoothly and accurately regulates temperature, drying time, and other essential functions.
  2. Enhanced safety: Faulty control boards can pose safety risks, such as overheating or electrical malfunctions. Replacing it reduces the chances of accidents or hazards.
  3. Cost-effectiveness: Repairing or replacing the control board is often more cost-effective than purchasing a new dryer. By investing in a new control board, you can extend the life of your Whirlpool dryer without the need for a complete appliance replacement.
  4. Energy efficiency: A malfunctioning control board can cause the dryer to consume more energy than necessary. By replacing it, you can improve energy efficiency and potentially reduce your electricity bills.
  5. Peace of mind: Knowing that your dryer has a properly functioning control board provides peace of mind. You can have confidence in the dryer’s performance and minimize the risk of unexpected breakdowns or issues.

Frequently Asked Questions (FAQs)

Q: Can I replace the control board myself, or do I need a professional technician?

A: While it is possible to replace the control board yourself, it is recommended to seek professional assistance, especially if you are unfamiliar with electrical components or unsure about the process.

Q: Where can I purchase a replacement control board for my Whirlpool dryer?

A: Replacement control boards can be found at authorized Whirlpool parts distributors, online appliance retailers, or through Whirlpool’s official website.

Q: How long does it take to replace the control board in a Whirlpool dryer?

A: The time required for replacement can vary depending on the dryer model and your familiarity with the process. It typically takes between 30 minutes to an hour.

Q: Can I use a control board from a different dryer model?

A: It is recommended to use a control board specifically designed for your Whirlpool dryer model. Control boards from different models may not be compatible or function correctly.

Q: What should I do if the dryer still has issues after replacing the control board?

A: If problems persist, it is advisable to contact a professional technician for further diagnosis and repair. They can identify any underlying issues and provide the necessary solutions.


Replacing the control board in your Whirlpool dryer is a practical solution to address malfunctions and ensure the appliance operates efficiently.

By following the outlined steps and considering the maintenance tips, you can enjoy a fully functional and reliable dryer once again.

Don’t hesitate to seek professional assistance if needed. Take the necessary steps to replace a faulty control board and restore the performance of your Whirlpool dryer.

Whirlpool Appliance Parts and Troubleshooting Guides

Other Control Board Repair Services:

Leave a Comment