Frigidaire Oven Buttons Not Working? Troubleshoot Your Control Board

If you own a Frigidaire oven, you may run into problems with the control board at some point. One of the most common issues is when the oven buttons stop working. When this happens, it can be frustrating and make it difficult to cook your favorite meals.

Fortunately, there are some troubleshooting steps you can take to resolve the issue. In this article, we’ll go over what to do if your Frigidaire oven buttons aren’t working.

Table of Contents

1. Introduction
2. Common Causes of Frigidaire Oven Button Problems
3. Signs That Your Control Board Is Faulty
4. How to Troubleshoot Your Control Board
   • Step 1: Check for Error Codes
   • Step 2: Reset the Control Board
   • Step 3: Check for Loose Wires
   • Step 4: Inspect the Control Board for Damage
5. How to Replace Your Control Board
6. Conclusion
7. FAQs

Introduction

Frigidaire ovens are known for their durability and reliability. However, like any appliance, they can run into problems from time to time. One of the most common issues that Frigidaire oven owners encounter is when the oven buttons stop working.

This can be frustrating and make it difficult to cook your favorite meals. Fortunately, there are some troubleshooting steps you can take to resolve the issue.

Common Causes of Frigidaire Oven Button Problems

There are several reasons why your Frigidaire oven buttons may stop working. Here are some of the most common causes:

• Control board failure
• Loose or damaged wires
• Electrical surges or power outages
• Spills or food debris on the control panel

Signs That Your Control Board Is Faulty

If your Frigidaire oven buttons aren’t working, there’s a good chance that your control board is faulty. Here are some signs that your control board may be the problem:

• The oven display is blank or shows incorrect information
• The oven beeps continuously
• The oven doesn’t respond when you press the buttons
• The oven starts and stops on its own

How to Troubleshoot Your Control Board

If you’re experiencing problems with your Frigidaire oven buttons, there are a few troubleshooting steps you can take to resolve the issue. Here’s what to do:

Step 1: Check for Error Codes

If your oven has an error code, it can help you diagnose the problem. Check the owner’s manual to see what the error code means and how to fix it.

Step 2: Reset the Control Board

Resetting the control board can sometimes fix the problem. To reset the control board, turn off the oven for at least 30 seconds, then turn it back on.

Step 3: Check for Loose Wires

If there are loose or damaged wires, it can cause problems with the oven buttons. Check the wiring to make sure everything is connected properly.

Step 4: Inspect the Control Board for Damage

If you don’t see any obvious problems with the wiring, the control board itself may be damaged. Inspect the control board for any signs of damage, such as burned or melted components.

How to Replace Your Control Board

If none of the troubleshooting steps work, you may need to replace the control board. Here’s how to do it:

1. Turn off the power to the oven.
2. Remove the screws that hold the control panel in place.
3. Disconnect the wires from the control board.
4. Remove the control board and replace it with a new one.
5. Reconnect the wires and reattach the control panel.
6. Turn the power back on and test the oven buttons.

NOTE: .. Find your Frigidaire oven control boards at Repair Clinic, with same-day shipping and a 365-day return policy HERE!

Conclusion

If your Frigidaire oven buttons aren’t working, it can be frustrating, but there are several troubleshooting steps you can take to fix the problem.

From checking for error codes to inspecting the control board for damage, these steps can help you identify and resolve the issue. And if all else fails, you may need to replace the control board.

Remember to always turn off the power before attempting any repairs or replacements, and if you’re not comfortable doing it yourself, don’t hesitate to contact a professional for assistance.

FAQs

1. How do I reset my Frigidaire oven control board? To reset the control board, turn off the oven for at least 30 seconds, then turn it back on.
2. How do I check for error codes on my Frigidaire oven? Check the owner’s manual to see what the error code means and how to fix it.
3. Can I replace the control board myself? If you’re comfortable with DIY repairs and have some experience with electrical work, you may be able to replace the control board yourself. Otherwise, it’s best to contact a professional for assistance.
4. How much does it cost to replace a Frigidaire oven control board? The cost of replacing a control board can vary depending on the model and the repair service. Contact a professional for a quote.
5. How can I prevent problems with my Frigidaire oven control board? Regular maintenance, such as cleaning the control panel and checking for loose wires, can help prevent problems with the control board. Additionally, using surge protectors and avoiding power outages can also help protect your oven.

Frigidaire Appliance Parts and Repair Guides

• 
  Troubleshooting Common Frigidaire Affinity Dryer Control Board Issues
• 
  Frigidaire Oven Buttons Not Working? Troubleshoot Your Control Board
• 
  Frigidaire Oven Not Heating? How to Fix with Control Board Troubleshooting
• 
  Diagnosing Common Problems with Your Frigidaire Oven Control Board

Appliance Control Boards:

• DC92-01982A Samsung Washer Control Board
• DE92-03045F Samsung Range Oven Control Board
• DC92-01982B Samsung Washer Control Board